Gamet Bearings

Contact Now

Gamet Bearing must be correctly lubricated to reduce friction between the rolling elements and raceways. Lubrication will minimize wear and protect bearing surfaces against corrosion. The choice of a suitable lubricant and method of lubrication is very important and depends upon the operating conditions (temperature, range, speeds, loads, environment). A wide variety of greases and oils is available offering solutions for all applications.


The inner races (cones) of the bearings must be preheated to expand sufficiently to assist mounting on shaft. Never attempt to fit cold as the amount of interference between cones and shaft will prevent sliding and any direct blows will cause damage to rolling elements and raceways. Heating can be achieved using induction heaters, ideal for grease lubricated bearings, or oil baths suitable for oil lubricated bearings. Under no circumstances should a pre-greased bearing be heated by submersing in oil as contamination of grease will occur. The temperature required to sufficiently expand cones to allow reasonable mounting time varies depending upon size and section, but 70ºC will suffice for the majority of applications. Care must be taken when locking bearings to ensure all rolling elements are seated properly, this is achieved by rotating at periodic intervals during locking. 

 

Gamet 181111X/181190XG tapered roller bearings

11.2 kN 165 mm
100 °C 3.7 Nm

Gamet 164133X/164196XP tapered roller bearings

2.76 Hz Single Row Ball Bear
-20 °C 2.03 Hz

Gamet 131093X/131152XH tapered roller bearings

27 mm ES205-16G2
65 mm 12mm

Gamet 101038X/101076XG tapered roller bearings

8 Nm 19.5 kN
30.16 mm -20 °C

Gamet 119045/119088XG tapered roller bearings

12.8 kN 100 °C
20 mm 6.65 kN

Gamet 284234X/284355XC tapered roller bearings

8 3,250 kN
438 mm 4 mm

Gamet 123073X/123120XG tapered roller bearings

27 mm 29 mm
131 kN 1.5 mm

Gamet 187185/187258G tapered roller bearings

NTN 110 mm
22.5 mm 0.34 kg

Gamet 161140/161200P tapered roller bearings

18mm ES211-32G2T04
61.3 mm 170.5 mm

Gamet 80035/80066X tapered roller bearings

35mm 4.29 kg
119 mm 64 mm
1/10